P0011 Code means the ECU has detected the intake camshaft in bank 1 is more advanced than what the ECM has commanded. See how to fix the OBDII error code quickly.
The P0014 OBD-2 code involves a problem with the camshaft in bank-1 with symptoms that include rough idling, stalling, and hard starting.
The P0010 OBD2 code is triggered when the variable valve timing in bank 1 is off, so the engine control module engages the check engine light.
The P0496 OBD2 code indicates an issue with your EVAP system’s purge flow. Learn what you should do to diagnose and repair this trouble code.
When you run a diagnostic on your vehicle and you find that you have a P0012 code, it is time to fix your car before the problem get worse.
Knowing the P0008 code about a variation in the timing mechanism in the crankshaft helps you better know how to repair this problem.
Fixing a blown head gasket is not as hard as you might think. With the right tools and enough time you can work it out by following these simple steps.
In the unfortunate event that your car will not start, you may be faced with a bad starter. It will be beneficial to be already prepared in this situation. The following steps will provide you with the proper knowledge on how to start a car with a bad starter. It is critical to note that a bad starter must be rebuilt or replaced; however, if you are stranded, these methods will offer alternative solutions to get your vehicle started.
Step-by-step guide on how to check brake fluid in your vehicle use a simple but effective approach. Also, you can learn how to do it yourself with little or no mechanical experience.
Changing brake fluid is a bit complicated than just adding extra brake fluid to the reservoir. You should flush and replace the old brake fluid in the entire brake system. Learn how you should go about it…